Advanced Electro Ceramics

Air In-Line Sensors (Bubble Detectors)

CeramTec’s Technical Ceramics business produce ultrasonic air-in-line sensors and ultrasonic bubble detectors that offer very high reliability for the detection of air bubbles in liquid flows in medical dosing applications.

Download free brochure
Medical Equipment,Piezo Ceramics
Medical In-Line Sensors
318 KB,  pdf
Bubble Detection

Our design expertise and manufacturing capability in this highly specialised sector allows development of high specification products to meet the tight tolerances of our medical OEM customers.

We can supply sensors and systems for applications including volumetric infusion pumps, hemodialysis machines, blood collection and component separation instruments and cardio-pulmonary bypass systems.

Our ultrasonic air-in-line sensors and ultrasonic bubble detectors can be designed to suit a variety of plastic tubing, as commonly used in medical equipment. The quality of our designs and the high performance of our piezo materials mean that bubble sizes down to four microlitres in volume or just two millimetres in diameter, can be detected.

Integrated Air-In-Line Sensors

Ultrasonic air-in-line sensors / ultrasonic bubble detectors are available on their own or complete with integrated control electronics and / or additional integrated sensors. For example, the air-in-line sensor can be combined with optical sensors to detect that the housing is correctly closed, for fail-safe operation.

Standard Products

We have a range of air bubble sensors to suit a variety of applications. These sensors will detect the presence of air bubbles in flexible tubing for example in infusion lines. All the sensors ca be mounted in any orientation and are designed to be dry coupled to flexible tubing such as PVC or silicone. Our range covers a wide variety of tube sizes and are IP67 rated and RoHS compliant.

Model 09254

This sensor is designed for small diameter tubing around 3/32" (2.4mm) outside diameter where low flow rates and volumes are required, such as accurate liquid dispensing and insulin pumps.

Model 09168

This sensor is designed for tubes around 3/16" (4.7mm) outside diameter and are used extensively in liquid handling applications.

Model 09267

This sensor is designed for tubes around 1/4" (6.3mm) outside diameter where bigger flow rates are required. Typical applications include haemodialysis, blood apheresis, cardiopulmonary bypass.

Back to Overview Page

Medical Sensors

We support you